Service Releases

Replies to This Discussion

Permalink Reply by George on July 21, 2012 at 6:03am

I have Norton Internet Security 2011 and it blocked and removed the the 32bit Flamingo NXT patch also.

George

• ▶ Reply

Permalink Reply by Leo Berk on July 25, 2012 at 7:35am

I have also received the same threat from Norton about the new release. I'm waiting for the green flag before I install this.

Thanks,

Leo

• ▶ Reply

Permalink Reply by Scott Davidson on August 6, 2012 at 1:26pm

The installer is OK.  We are working to remove the part of the installer that Norton is complaining about.

• ▶ Reply

Permalink Reply by Leo Berk on August 6, 2012 at 1:27pm

Thanks for the response.

Leo

• ▶ Reply

Permalink Reply by Mash Derrick on August 22, 2012 at 3:30am

Has this happened yet as the last time I downloaded it, it was deleted.

Thanks M

• ▶ Reply

Permalink Reply by Gregory McCambley on July 28, 2012 at 12:50pm

I also have nXt (paid version) and have downloaded the patch etc...

But in Rhino 5 beta, I can't use the Panels/Ground plane, and get this error "

Command: _-GroundPlane   The ground plane is not supported by the current render plug-in

Nor can I see any of the icons associated with Flamingo nXt, as I can in version 4 of Rhino.

Is this as expected?

• ▶ Reply

Permalink Reply by A Smith on July 31, 2012 at 4:32am

Go to your Control Panel, from the Flamingo Dropdown bar.

Then go across to Environment and click the check box Enabled underneath the header Ground Plane. You can also set at what level you want your groundplane to be with the elevation box.

Hope this helps

• ▶ Reply

Permalink Reply by Scott Davidson on August 23, 2012 at 10:12am

You are trying to run the Rhino v5 version of groundplane.  You need to use the groundplane control in the environment tab in the Flamingo NXT control panel.

• ▶ Reply

• ‹ Previous
• 1
• 2
• Next ›
• Page