easy rendering for Rhino in Windows
Rhino shuts down when I open it with Flamingo NXT
I was able to use flamingo nxt till yesterday. However now rhino shuts down as soon as I open. If I uninstall flamingo nxt, rhino works. But when I install it again, rhino doesn't work. What do you think the problem is?
Replies to This Discussion
-
Permalink Reply by Scott Davidson on -
Please make sure you have the most recent Rhino. To do this, go to the help pulldown and select Check for updates. This will help.
-
Permalink Reply by John Morse on -
Did something change yesterday such as installing a Rhino or Flamingo nXt update? We need to figure out if it is a problem with an old Flamingo with a new Rhino or the other way around.
It would also be helpful to send the crash files from your desktop when Rhino crashes so I can take a look at them.
-
Permalink Reply by Mustafa Hasdogan on -
Dear All,
Thank you for suggestions. I solved the problem by following below steps:
1- I downloaded the latest version of flamingo nXt
2- I loaded the program,
3- I opened Rhino 4 with "repair" command from the control panel.
4- I opened rhino 5 with "repair" command from the control panel.
5- I loaded Flamingo 2
Now all programs are working.
© 2013 Created by Scott Davidson.
