Image Editor issue

Replies to This Discussion

Permalink Reply by Scott Davidson on June 20, 2011 at 8:44am

We are not a big fan of large memory footprints on Fusion systems.  There are two potential problems.  One is Fusion, which sounds like you will be switching to Bootcamp.  And the other is a memory limit on 32-bit machines.  The second is hard to access.  In Bootmap will you be running 32-bit or 64-bit Windows?

• ▶ Reply

Permalink Reply by tim bell on June 20, 2011 at 8:58am

32 bit (XP)

I am partitioning 40 gig to windows (out of 500). Sound good?

• ▶ Reply

Permalink Reply by Scott Davidson on June 20, 2011 at 9:48am

This is always a hard call.  Practically, I actually like to see 100 - 120 GB for a Windows partition.  You might be able to get away with 60- 80 GB, but I expect you will want more space over time.

• ▶ Reply

Permalink Reply by tim bell on June 20, 2011 at 9:56am

Good, will do. I've been trying to install my XP on my brand new MBP and just found out it doesn't support the drivers-have to go to Windows 7. 

 

Any thoughts on 64 bit vs. 32 bit?

 

Onward... and Thanks!

• ▶ Reply

Permalink Reply by Scott Davidson on June 20, 2011 at 11:17am

I am a fan of 64-bit Windows 7.  It solves a lot of problems.  As we push forward with Rhino and NXT, 64-bit will be the best platform to have.

• ▶ Reply

Permalink Reply by Jon on June 21, 2011 at 3:35am

I also am having this same problem.  Is there a work around for this?  I have about 50 images that I just let run in the farm to save me some time.  I am running win 7, but only 32 bit due to rhino 4.  Any ideas on how to resolv this?

Attachments:

• nxt problem.JPG, 53 KB

• ▶ Reply

Permalink Reply by Scott Davidson on June 21, 2011 at 9:29am

Can you send us the file(s) you are trying to read into the editor?  We will take a look at it.

 

You can use this link to send it to me at scottd@mcneel.com : 

 

http://www2.mcneel.com/upload/Upload.aspx

• ▶ Reply

Permalink Reply by Olivier T on March 21, 2012 at 1:17am

I have the same problem !

I#m also running under windows XP, but my .nxt file is only 22mb. nXtimageeditor crashes using only 650Mb of memory. any idea to open the file ? I just need the material mask before photoshoping.

thanks

• ▶ Reply

Permalink Reply by tim bell on March 21, 2012 at 4:38am

Hi Oliver,

The problem I was having related directly to operating software. I run Rhino on a MacBook Pro and I had been using VMWare's Fusion which is similar to Parallels in that they both work with Mac OSX open (allows access to both Mac and Windows at the same time).

I was advised to switch to Bootcamp and the problem immediately stopped and has never returned. Additionally all Rhino/Flamingo NxT operations are much faster.

Best of luck,

tim